The Three Greatest Moments In Ghost Immobiliser 2 History

Ghost Immobiliser 2

Guards your vehicle from key cloning, and stops thieves from driving your vehicle with original keys. Our latest immobiliser is connected to your vehicles data network, CAN, and a unique PIN code must be entered in order for the engine to begin.

Contrary to trackers Ghost doesn't transmit any radio frequency signals and cannot be detected by diagnostic tools. Also, it doesn't have any LED indicators or buttons that can give the impression that it is in your van or car.

Anti-key cloning

The Ghost immobiliser was designed to combat key cloning. This device is connected to your vehicle's data network CAN, and creates an unique pin code using the factory buttons in your dashboard and steering. This will stop the thief from being able start your vehicle. If the incorrect PIN code is entered, your engine cannot be started and it will be impossible for them to escape with your pride and joy.

A ghost immobiliser is a new technology that is extremely hard for thieves to beat. Unlike physical deterrents like wheel locks and steering locks that can be cut off or jacked the ghost immobiliser is a discrete electronic device that isn't recognized by ordinary thieves since it doesn't emit any radio signals and works silently.

This next generation immobiliser is equipped to shield your car from a myriad of threats like key-hacking, cloned keys and relay attacks. It can also prevent thieves from adding the new key or replacing your ECU, as it will not allow the car to start without entering the correct PIN code before entering.

The ghost immobiliser 2 unlike other immobilisers, it does not require an external remote or key fob to operate. It can be turned off using an app on the smartphone of the driver. This is perfect for when you need to give your car to valet parking, or for maintenance without key fobs.

The autowatch ghost installers near me Ghost-II is the latest evolution of our ground-breaking ghost immobiliser. It is designed to be simple and easy to use and yet be as secure as is possible. This is done by linking the Ghost-II into the vehicle's data network CAN, meaning that there aren't any additional wires to hide or be easily identified. It has built-in features that allow you to disarm the Ghost-II simply by connecting it to your vehicle's Bluetooth.

OBD port hacking

OBD port hacking has become the latest method used by professional car thieves. Thieves have access to your vehicle's OBD port with no more than an laptop, an app and a few cables, which can be purchased on the internet for under PS50. Once they have access, they can do anything they want to do, from resetting your vehicle's fault codes, tuning your car, or stealing it within a matter of minutes.

It can prevent your car from being stolen by requiring a unique PIN number to be entered with your key fob prior to you start the engine or leave. It does this by communicating with the vehicle's ECU (Engine Control Unit) on the CAN Data circuit and is totally undetectable to any RF scanning or code grabbing technology. It even comes with a Service/Valet option that allows your vehicle to start without needing the PIN code.

To use an OBD hacking device you must have a laptop with software capable of reading the OBD protocol. This can be purchased for under PS100 on eBay or Amazon. You will also need an OBD cable that has OBD pins that are connected to the CAN bus. These can be found on Amazon/Ebay for around PS50. The next step is to connect the cable into the wire harness of your vehicle for example, the radio wiring harness.

Once the hacker has access to the OBD port of your vehicle, they are able to send diagnostics to the system using high baud rates that will cause a crash of the car's CAN and prevent the system from functioning. This can cause the engine to stop, doors to lock and even the brakes to be engaged.

No additional remotes or key fobs required.

The car immobiliser is a great piece of anti-theft technology utilized by millions of modern cars across the globe. Using engine ECU software to prevent vehicles from starting if a fake transponder signal is sent to it an aftermarket immobiliser is a great way to protect your vehicle.

However, it could be simple for a burglar to get around an immobiliser system when they have access to the code that allows them to disable it. The battery inside most key fobs can be removed by prying it open which means that a burglar could employ a simple tool take out the immobiliser's circuit board and replace it with the blank. Then they will be capable of starting your vehicle.

With the TASSA approved Ghost 2 immobiliser, there are no additional keys or remotes needed. The immobiliser connects to the engine ECU (Engine Control Unit) via a discrete and silent CAN data circuit that is not detectable by diagnostic tools, such as those used by high-tech thieves. It doesn't include a traditional keyfob, which has an LED indicators, so it's not visible.

There will be times that you must deactivate Autowatch Ghost 2's auto-protection, for example during the valet parking or service work. The ghost CAN immobiliser has a special mode to do this, referred to 'Service Mode which is activated by pressing the button on your smartphone. The car is still operable however, the maximum speed is limited to 36 mph.

If you'd like more information about the TASSA accredited local ghost immobiliser installer immobiliser, contact us today to book a demonstration at our workshop. A member of our team will explain the process and will give you a Ghost 2 emergency card, installation certificate, and security guarantee.

Simple change of PIN code

bmw m3 ghost installer is a new generation device that can secure your vehicle without cutting wires or adding aftermarket key fobs. It is directly connected to the vehicle's CAN data network and a personal PIN code is programmed into it by pressing buttons on your steering wheel and dash. The device does not emit RF signals, therefore it is unable to be manipulated. This makes it difficult to be detected using sophisticated RF scanning and code grabbing technologies used by modern thieves.

The PIN code sequence can be changed whenever you wish to lock out previous drivers and even includes an override code in the event of lost sequences. The installer will show you the process to do this during installation. The system comes with a valet-mode feature that allows you to temporarily disable pin input sequences so that the mechanic or garage can service the vehicle without having to know the code. This is a great option for those who do not wish their pin sequence to be revealed but still would like to leave their vehicle with valet parking or service.

Ghost is an individual system that utilizes the buttons on your car to create an individual and interchangeable PIN sequence. This sequence is entered through the app for smartphones, meaning there are no additional LEDs displayed and your vehicle is protected with no risk of being disabled by hackers or any other technology.

Tested for every vehicle

Contrary to key fobs which require you to press buttons on them, a ghost immobiliser is discretely placed under your dash or steering wheel to make sure you are unaware it's there. The device is connected to the CAN network in your vehicle, and a PIN code can be programmed by using the buttons on your car. The system stops your engine from starting unless the code has been entered before. This means that thieves cannot clone your car's existing keys or access the OBD port to hack into your vehicle.

Ghost can be installed in all vehicles, including electric cars, vans motorhomes and bikes. It what is a ghost immobiliser also extremely versatile and can be set to disable under different circumstances. For instance, it can be set to enter Valet mode when the vehicle is transported to a valet parking or a service provider. This means that your car can be operated within a set 30mph speed limit, and the ghost immobiliser will activate itself when it is returned to your home.

The device can be reset at any time using your personal PIN code. This is beneficial in the event that you forget your code or the device ceases to function, meaning that it's effectively just as good as new.

It's also worth noting that the device is completely unnoticeable to anyone who isn't familiar with it. This is because it runs through the buttons that are already on the dashboard of your car and on the steering wheel, and uses the data they send to identify which button has been activated. This makes it a completely safe and reliable security solution that isn't affected by RF scanning, jamming or door lock pick sets.